Spanish Renaissance artillery and infantry

This month it has been back to painting for my Italian Wars project. I decided to make some progress on my Spanish forces before hopefully moving on to some Venetian Cavalry next month. The focus was on some Spanish Renaissance artillery.

I needed to increase the number of Spanish arquebusiers for a convention game of the Battle of Bicocca that I am planning, so I wanted to paint four units of 8 figures. I also had five Organ guns in my painting pile from Redoubt Enterprises that I wanted to paint. These guns have large spikes at the front and on the wheels, and they sound very like the Spanish war carts at the battle of Ravenna. I decided to equip man these guns with figures from the Assault Group.

A view along the line of the guns supported by the infantry.

The organ guns don’t really come with any instructions, so it took some playing around to see how they fitted together. I was even left with a couple of parts that didn’t look like they belonged. Overall they painted up reasonably well. At only five UK Pounds a piece they were not overly expensive either.

Looking down the gun line from the opposite direction.

I used the small equipment from the Assault Group Spanish/Neapolitan artillery crew.

A view from the front.

The color pallet of the Spanish troops is a little more on the dull side compared to some of the Spanish that I have painted before. I think that this choice has been influenced by some of the colors that I used for my recent cossack uprising project.

Another view from the front

I have some Spanish pike and sword figures still to paint. These figures will be added to the arquebusiers to form two more colunellas. I am deciding whether or not to paint them before I move on to the Venetian Cavalry.

A view from behind the infantry

I was happy with how the Spanish Renaissance artillery turned out. They are certainly different from the rest of the artillery that I have in the collection. They will be great for representing the Spanish war carts when I eventually refight the Battle of Ravenna.

British Forward Operating Base.

I have been slowly working on a 28mm modern skirmish project using the Skirmish Sangin rules. As part of a scenario I am putting together I have been building a British Forward Operating Base for Helmland Province, Afghanistan.

I decided to only construct the front of the base as that is where all of the action will take place. I built a guard tower at each of the corners. The walls of the base were made from Hesco bags with razor wire on top and in front of them.

Overview of the base covering about 2′ by 6′

S&S Models made the Hesco walls. The image above shows two approaching British Foxhounds (still to paint). White Dragon Miniatures produced the two Foxhounds and these will support two larger Mastif MRAPS. I also have 4 quad bikes for SAS interdiction scenarios.

The entrance to the base guarded by British troops supported by the Afghan National Police.

The entrance to the base consists of a guard shack, New Jersey barriers and a barrier all made by Miniature Building Authority. I will also add a moving chain link fence at the back.

Another view of the entrance

Along the road I have some billboards. One of the billboards was built from a model kit, the other two were scratch built. I will be installing some Afghan election posters on the billboards.

Close up of the Hesco walls.

On top and in front of the walls is some razor wire made by Army Painter.

Entrance to base guarded by the ANP.

In the back-ground of the above photo is a command post and barracks. These are made from containers from the Miniature Building Authority with one of their satellite dishes on top.

British soldier from 3 Para watching the entrance from atop of the Hesco walls.

The Hesco walls at the front of the base have a lower level of Hesco bags behind allowing soldiers to patrol the wall. Many of these design choices were made after viewing photos of actual Forward Operating Bases in Afghanistan.

View of the rear of the walls and a guard tower.

The guard towers were made by using two containers as the base. A staircase and platform were then made from Plastruct girders and other items. A Hesco bunker from S&S models was then placed on top of some H beams. The roof of the bunker is removable to put figures inside.

Close up of the other guard tower.

I will be purchasing a better, larger desert terrain mat as well as adding more ground clutter to the base including pallets, oil drums, signs and a table tennis table.

I am also working on scenario to include the British Forward Operating Base. This will be a large scale Taliban assault on the base.